1Application BulletinAugust 3. 2007Garmin GPS to XLeGarmin GPS to XLe Application NoteOverviewThe HE200GPS183 GPS Receiver (GPS183) is an OCS accessor
2Wiring DiagramGPS XLe(MJ2)1 Yellow (Not Used)2 Red ---------------------------------------------- Supply Voltage 5 VDC3 Black (small) -------------
35. The first step is to set the Network Setup parameters. This is to configure the comm. Port settings.Baud Rate, Parity, Data Bits, Stop Bits, Han
4%R01016. The second tab is to configure thedevice. In this case there is only onedevice and this has been done foryou. With the GPS protocolselect
59. Click OK to accept the Scan List10. Click OK to Accept the Protocol Configuration.You are now done with the protocol setup11. The next step is
613. The last step is to use the GPS data in your Relay Ladder Logic, Data Logging or Display Screens.See Examples of GPS Data on the XLe Screens Bel
Comments to this Manuals