Horner-apg XL7 OCS User Manual download pdf (Page 79)

XL7 User Manual

CHAPTER 15: CSCAPE CONFIGURATION

15.1 Overview

XL7 OCS hardware is programmed with a Windows based PC application called Cscape. This application

can be used to program, configure, monitor and debug all aspects of the XL7 OCS unit. Please see the

on-line help provided with Cscape for additional details.

15.2 Cscape Status Bar

When the XL7 OCS is connected to a PC using Cscape software a Status Bar appears at the bottom of the

screen. The Cscape Status Bar can be used to determine if communications have been established

between the XL7 OCS and the Cscape program. Components of the Cscape Status Bar are explained

below.

Ready

User:

HE-XExx1-CsCAN (Model=)

Equal

Local :1 Target :2(R) [no

forces]

MOD

Figure 15.1 - Cscape Status Bar

Equal Indicator – indicates whether the current program in Cscape is equal to the program

stored in the Target Controller.

• If Equal, the program in Cscape is the same as the program stored in the Target Controller.

• If Not Equal, the program in Cscape is not

the same as the program stored in the Target

Controller.

• If Unknown, there may have been a change since the last time the program in Csca

pe was

compared to the Target Controller.

Communications Status - indicates the current status of the

“pass through” Connector.

•

Local: xx – indicates the Network ID of the OCS to which

the Cscape program is physically connected through its

serial port. It can serve as a pass through device to other

nodes on the network.

•

Target: yy(R) – indicates the Network ID of the device with

which the Cscape program is exchanging data.

Note: The Local unit and Target unit can be the

same unit or they can be separate units.

The following are status indicators:

(R) – Running

(D) - Do I/o

(I) – Idle

(?) – Cscape is not communicating with the remote unit.

[no forces] – indicates no I/O has been forced.

Message Line -

The contents of

these messages

are context

sensitive. The

Message line can

be empty.

Current User -

indicates who is logged

(for security purposes).

Controller Model - Network (Model Confirmation)

•

Controller Model indicates the controller model for

which the program in Cscape is configured.

•

Network indicates the type of net

work that the program

in Cscape expects to use (e.g., CsCAN).

•

(Model Confirmation) provides the following

indications:

•

(Model=) - the actual Target Controller matches the

configured Controller Model and Network.

•

(Model Not=) – the actual Target Controller does not

match the configured Controller Model and Network.

•

(Model ?) – there may have been a change since the

last time the Target Controller was compared to the

configured Controller Model and Network.

File Modified Indicator - indicates that

the file in the selected window has

been modified but has not been s

aved.

Page 79 of 110

1 2 ... 74 75 76 77 78 79 80 81 82 83 84 ... 109 110

Comments to this Manuals

No comments

Horner-apg XL7 OCS User Manual Page 79

Comments to this Manuals

Related products and manuals for Sensors Horner-apg XL7 OCS